STM32F4 Discovery STM32F407VGT6 ARM Cortex-M4 32bit MCU Core Development Board SPI I2C IIC UART ISC SDIO Schnittstellenmodul

Features Core: ARM 32-bit Cortex-M4 CPU with FPU, Adaptive real-time accelerator allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions Memories - Up to 1 Mbyte of Flash memory - Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM - Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories LCD parallel interface, 8080/6800 modes Clock, reset and supply management - 1.8 V to 3.6 V application supply and I/Os - POR, PDR, PVD and BOR - 4-to-26 MHz crystal oscillator - Internal 16 MHz factory-trimmed RC (1% accuracy) - 32 kHz oscillator for RTC with calibration - Internal 32 kHz RC with calibration Low-power operation - Sleep, Stop and Standby modes - VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode 2×12-bit D/A converters General-purpose DMA: 16-stream DMA controller with FIFOs and burst support Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input Debug mode - Serial wire debug (SWD) & JTAG interfaces - Cortex-M4 Embedded Trace Macrocell™ LQFP64 (10 × 10 mm) LQFP100 (14 × 14 mm) WLCSP90 LQFP176 (24 × 24 mm) Up to 140 I/O ports with interrupt capability - Up to 136 fast I/Os up to 84 MHz - Up to 138 5 V-tolerant I/Os Up to 15 communication interfaces - Up to 3 × I2C interfaces (SMBus/PMBus) - Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) - Up to 3 SPIs (42 Mbits/s), 2