OLED-Display 0,96 Zoll 1306 für Zero Delay Raspberry Pi Pico Arcade USB-Encoder SSD mit blau/gelbem IIC I2C seriellem Display

blue yellow 0.96 Inch OLED I2C IIC Display128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi Features: • 0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W • Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports • It compatibles with Arduino Nano, R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc. • No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts • There are no fonts embedded in the OLED controller, users can create fonts through font generation software. • OLED self-luminous, no backlight • High resolution: 128x64 (same resolution as 12864, high PPI) • Large viewing angle: greater than 160° (a screen with the largest viewing angle in the display) • Ultra-low power consumption: normal display 0.06w (far lower than TFT display) • Wide voltage power supply (3V~5V), compatible with 3.3V and 5V level logic, no need for level conversion chips • The IIC interface only needs 2 IOs to light up easily • Military-grade process standards, long-term stable work • Provide rich multi-platform routines and provide underlying driver technical support • Yellow blue, three color display scheme optional the GND AND VCC begin pin will send randomly • 1 x 0.96 oled module(with protective box) Yellow / blue 4pcs cable