ATTINY88 Mikro-Entwicklungsboard 16 MHz / Digispark ATTINY85 aktualisiert / NANO V3.0 ATmega328 erweitert kompatibel für Arduino

wy-plugin-end The MH-ET LIVE Tiny88(16.0Mhz) based microcontroller development board similar  to the Arduino line, only cheaper, smaller, and a bit less powerful. With the ability to  use the familiar  Arduino IDE the MH-ET LIVE Tiny88(16.0Mhz) is a great board to jump into electronics, or perfect for when an other board is too big or too much.The MH-ET LIVE Tiny88(16.0Mhz) is shipped fully assembled except for the headersincluded and easy to solder them by yourself. Specs: Support for the Arduino IDE 1.0+ (OSX/Win/Linux) 1. Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection) 2. On-board 500ma 5V Regulator 3. Built-in USB 4. 26 I/O Pins (2 are used for USB only if your program actively communicates over  USB, otherwise you can use all 6 even if you are programming via USB) 5. 8k Flash Memory (about 6k after bootloader) 6. I2C and SPI 7. 26-PWM (26 pins with Software PWM,only two(D9,D10) with hardware PWM ) 8. ADC on 8 pins 9. Power LED and Test/Status LED 10. Size(mm):44.5x18.3x3 PinOut: Installation Instructions:  First download the appropriate Arduino package at the Arduino.cc  website:  If using Arduino 1.6.6 or higher and windows - you will need to download and    install the drivers manually. Download, unzip and run “Install Drivers” (on 32bit  systems) or “DPInst64” (on 64bit systems). The driver files are located   here: 2.0a4.rar  Install or Unzip the Arduino application.  Run the Arduino application.  In the Arduino application go to the “File” menu and select “Preferences”,In the   box labeled “Additional Boards Manager URLs” enter: ackage_mhetlive_in